- ページ 5

浄水器 High Tech Gio-Bella HTH 888のPDF マニュアルをオンラインで閲覧またはダウンロードできます。High Tech Gio-Bella HTH 888 16 ページ。 Point of use residential water alkalizer for drinking and cooking

ページを印刷する

determined by convenience and easy access to both an

electrical outlet and water.

Remove original faucet aerator. This is usually done

•

without tools by rotating counter-clockwise.

Put the original aerator in a safe place and

•

install the diverter valve assembly in its place.

Note that if your faucet has threads on the

inside, there are 2 adapters included that can

be used. Position the diverter valve with the

barbed fitting pointing towards the Gio-Bella

Next, take the hose kit and roughly gauge

•

sufficient length from the Gio-Bella water

INPUT, to the barbed fitting on the diverter valve. Please

allow for the lateral swing of the faucet. You should also

compensate for any extra if you will be adding a

Bluestone Group pre-filter.

Once a sufficient length is determined, use a sharp pair of

•

scissors and cut the hose straight across in a single cut.

Using a dab of Vaseline, or soap, lubricate the end of the

•

diverter valve barbed fitting. Select a

clamp from the hose kit and place over

the hose end. Next, firmly press the hose

onto the barbed fitting until the entire

fitting length is inside the hose.

Slide the screw clamp onto the end of the

•

hose to the point where it is midway over where the

barbed fitting has penetrated. Tighten the screw clamp

firmly with a Phillips screwdriver. (Note, in some markets

spring clamps may be supplied instead.)

If installing any of Bluestone Group's prefilters:

•

o Sediment

Attaching

diverter to

faucet

Attaching hose to

diverter