Dynasty Fireplaces EF45D Instrucciones de instalación y manual de instrucciones - Página 4

Navegue en línea o descargue pdf Instrucciones de instalación y manual de instrucciones para Calentador eléctrico Dynasty Fireplaces EF45D. Dynasty Fireplaces EF45D 9 páginas. Electric heater with remote control
También para Dynasty Fireplaces EF45D: Instrucciones de instalación y manual de instrucciones para el propietario de la vivienda (8 páginas)

WARNING! Keep drapery and other furnishings at least 3ft /0.9m from the front and sides of the

electric fireplace.

Installation:

NOTE ！

•

After installation, ensure that there is a space between the wall and the

fireplace insert.

Install insert:

！！！ When inserting the heating unit into mantel; Do not let the bottom of the insert touch the

mantel to avoid scratching it.

Plug the power supply cord into a wall outlet (120Vac, 60Hz). The cord has a plug as shown at A.

You should connect as shown below:

ELECTRICAL CONNECTION

A 15 AMP, 120 Volt, the unit comes standard with 6 feet (1.8 m) three wire cord and plug, exiting

from the rear of the fireplace. Plan the installation to avoid the use of an extension cord. Preferably,

the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the

circuit breaker to trip or the fuse to blow when the heater is in operation.

GROUNDING

Grounding methods