- ページ 4

電気ヒーター Dynasty Fireplaces EF45DのPDF 取付説明書＆取扱説明書をオンラインで閲覧またはダウンロードできます。Dynasty Fireplaces EF45D 9 ページ。 Electric heater with remote control
Dynasty Fireplaces EF45D にも：ホームオーナー用設置説明書＆取扱説明書 (8 ページ)

ページを印刷する

WARNING! Keep drapery and other furnishings at least 3ft /0.9m from the front and sides of the

electric fireplace.

Installation:

NOTE ！

•

After installation, ensure that there is a space between the wall and the

fireplace insert.

Install insert:

！！！ When inserting the heating unit into mantel; Do not let the bottom of the insert touch the

mantel to avoid scratching it.

Plug the power supply cord into a wall outlet (120Vac, 60Hz). The cord has a plug as shown at A.

You should connect as shown below:

ELECTRICAL CONNECTION

A 15 AMP, 120 Volt, the unit comes standard with 6 feet (1.8 m) three wire cord and plug, exiting

from the rear of the fireplace. Plan the installation to avoid the use of an extension cord. Preferably,

the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the

circuit breaker to trip or the fuse to blow when the heater is in operation.

GROUNDING

Grounding methods