GalileoSky 4.0 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Cámara digital GalileoSky 4.0. GalileoSky 4.0 13 páginas. Rs232, rs485

RS232, RS485. Connection and Operation of Galileosky Photo Camera

(version 3 dated from August 8, 2018)

Connecting Photo Camera via

RS232 Interface

The camera is connected to the Galileosky v. 5.0 tracking unit via RS232 according to the

scheme presented in Picture 2.

The algorithm of connection and setting is the following:

Connect the contacts RXD, TXD, GND of the camera and TXD0, RXD0, GND of the

tracking unit correspondingly.

ATTENTION!

Grounds (GND) of the tracking unit and the camera must be connected,

RS232 contacts should be connected strictly according to the scheme: RXD of the camera

to TXD0 of the tracking unit and TXD of the camera to RXD0 of the tracking unit. Power

supply is provided separately.

Insert a microSD card into the tracking unit in order to save the pictures.

Set RS232[0] input of the tracking device to operate with the camera (Pic. 3):

- go to tab Settings -> Digital Inputs and select "Galileosky photocamera" or send

command RS2320 4 in the Commands tab;

- click Apply button;

Pic. 2

Connection scheme of the

camera to Galileosky v. 5.0

via RS232

Pic. 3

Settings of RS232 input in the

Configurator