AUTOPRO BD1208 Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Reproductor Blu-ray AUTOPRO BD1208. AUTOPRO BD1208 12 páginas.

Imprimir página

DVD-R DL (DVD Video format and DVD Video Recording format), DVD+R, DVD+RW,

and DVD+R DL, Audio CD/CD-R/RW discs which have been recorded in one of the following

standards: CD-DA and stillpictures (JPEG). Close the session after recording.

Note: Your player can not write to discs.

Trouble shooting

Check the following information for the possible cause and solution for a problem

before contacting the nearest service center or dealer for repairs.

The following do not indicate a problem with your player:

Regular disc rotation sounds.

Image disturbance during search.

Power:

Problem: No power

Solution: Make sure that the power cord is plugged into a power outlet and that the

outlet is supplying power.

Problem: The player switches to standby mode

Solution: After a period of inactivity, your player switches to standby mode automatically.

This is a power saving feature.

If your player switches to standby mode unexpectedly, a safety device may have been

activated. Press STANDBY/ON on the front of your player.

Operation:

Problem: Remote control does not work

Solution: Make sure that you are pointing the remote control at the remote control sensor on

the front of your player.

Make sure that there are no obstructions between the remote control and the remote

control sensor on the front of your player.Make sure that there is no colored glass between

the remote control and the remote control sensor on the front of your player. Colored glass,

such as the glass door of an entertainment center, can interfere with signal reception.

Make sure that the remote control sensor is not exposed to direct sunlight or bright

light. These can interfere with signal reception. Replace the batteries.

Problem: Some or all functions do not work

Solution: Some functions are not allowed by the disc, for example, fast-forwarding through the

warning information at the beginning of the disc.

Condensation may have formed inside your player. Turn off your

player and wait one to two hours for the condensation to evaporate.

Problem: Playback fails to start or starts then stops even when play/pause is pressed

Solution: Make sure that the disc is inserted face up in the disc tray.

Make sure that the disc is not dirty

The disc may be blank or incompatible with your player. Try another disc.

Problem: Start up is slow and audio and video output takes a long time

Solution: If power has been interrupted or the power cord has just been connected,

Supported Discs

·Writeable DVD discs (DVD-RAM, DVD-RW, DVD-R) must be finalized, VR-mode only.

·Your player supports discs that are compatible with DVD-RAM Standard Version 2.0.

·Playback may not work for some types of discs, or when specific operations, such as

angle change and aspect ratio adjustment, are being performed. Information about the

disc is written in detail on the box.

·Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches, or

deposits of cigarette smoke on the recording surface may make it impossible to

use the disc for playback.

·Windows Media Audio (WMA) files must be written to the disc with a .wma file extension in order

to be recognized and played back correctly.

·JPEG picture files must be written to the disc with a .jpeg or .jpg file extension in order to be

recognized and played back correctly.