ページを印刷する
DVD-R DL (DVD Video format and DVD Video Recording format), DVD+R, DVD+RW,
and DVD+R DL, Audio CD/CD-R/RW discs which have been recorded in one of the following
standards: CD-DA and stillpictures (JPEG). Close the session after recording.
Note: Your player can not write to discs.
Trouble shooting
Check the following information for the possible cause and solution for a problem
before contacting the nearest service center or dealer for repairs.
The following do not indicate a problem with your player:
Regular disc rotation sounds.
Image disturbance during search.
Power:
Problem: No power
Solution: Make sure that the power cord is plugged into a power outlet and that the
outlet is supplying power.
Problem: The player switches to standby mode
Solution: After a period of inactivity, your player switches to standby mode automatically.
This is a power saving feature.
If your player switches to standby mode unexpectedly, a safety device may have been
activated. Press STANDBY/ON on the front of your player.
Operation:
Problem: Remote control does not work
Solution: Make sure that you are pointing the remote control at the remote control sensor on
the front of your player.
Make sure that there are no obstructions between the remote control and the remote
control sensor on the front of your player.Make sure that there is no colored glass between
the remote control and the remote control sensor on the front of your player. Colored glass,
such as the glass door of an entertainment center, can interfere with signal reception.
Make sure that the remote control sensor is not exposed to direct sunlight or bright
light. These can interfere with signal reception. Replace the batteries.
Problem: Some or all functions do not work
Solution: Some functions are not allowed by the disc, for example, fast-forwarding through the
warning information at the beginning of the disc.
Condensation may have formed inside your player. Turn off your
player and wait one to two hours for the condensation to evaporate.
Problem: Playback fails to start or starts then stops even when play/pause is pressed
Solution: Make sure that the disc is inserted face up in the disc tray.
Make sure that the disc is not dirty
The disc may be blank or incompatible with your player. Try another disc.
Problem: Start up is slow and audio and video output takes a long time
Solution: If power has been interrupted or the power cord has just been connected,
19
Supported Discs
·Writeable DVD discs (DVD-RAM, DVD-RW, DVD-R) must be finalized, VR-mode only.
·Your player supports discs that are compatible with DVD-RAM Standard Version 2.0.
·Playback may not work for some types of discs, or when specific operations, such as
angle change and aspect ratio adjustment, are being performed. Information about the
disc is written in detail on the box.
·Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches, or
deposits of cigarette smoke on the recording surface may make it impossible to
use the disc for playback.
·Windows Media Audio (WMA) files must be written to the disc with a .wma file extension in order
to be recognized and played back correctly.
·JPEG picture files must be written to the disc with a .jpeg or .jpg file extension in order to be
recognized and played back correctly.
4