Galleon SIGNALCLOCK V2 Manual de instalación y uso - Página 16
Navegue en línea o descargue pdf Manual de instalación y uso para Reloj Galleon SIGNALCLOCK V2. Galleon SIGNALCLOCK V2 19 páginas.
Imprimir páginaRESETTING THE CLOCK
To reset clock, use a small pin to press and hold the reset button (located on the rear of the clock)
while the unit has power and network access. The clock will countdown from ten. Ensure you keep
the reset button pressed down for the duration of the countdown or the reset will be cancelled.
Once the reset procedure has completed, the clock will reboot with factory default settings. Some
things to note:
-
The web interface password will reset to admin.
-
DHCP will be enabled by default. After the clock has rebooted, watch the clock's face for
the IP address.
www.galsys.co.uk
galleonsupport.com
SIGNALCLOCK V2 Manual
16
TEL:
+44 (0) 121 608 4433
FAX:
+44 (0) 121 608 4477