GALLERY 36 Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial GALLERY 36. GALLERY 36 18 páginas. Canvas stretching machine

9. Remove your foot from the pedal and move the entire assembly forward and off of the

plates. This is referred to as the "un-loaded position". The stretcher frame should be in

front of the plates and the canvas should be held fast in the clamp. It is now ready to be

stretched.

Note: Overhang

10. Flip the toggle switch on the far right side to start the stretching process. Be sure to

maintain control of the stretcher frame with your free hand. It should rest on the outside

rail applying only light pressure. The stretching pressure should be no more than 15-20

psi to start a stretch. Increase the pressure slowly and let the frame rise no more than 3-

4". Do not push the frame flat against the deck. Pushing down on the frame during a

stretch will promote slipping and can cause the artwork to distort.

"Small art tends to flip off the stretcher plates. Always keep a free hand on the rail."