GALLERY 36 Інструкція з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Промислове обладнання GALLERY 36. GALLERY 36 18 сторінок. Canvas stretching machine
Друкувати сторінку9. Remove your foot from the pedal and move the entire assembly forward and off of the
plates. This is referred to as the "un-loaded position". The stretcher frame should be in
front of the plates and the canvas should be held fast in the clamp. It is now ready to be
stretched.
Note: Overhang
10. Flip the toggle switch on the far right side to start the stretching process. Be sure to
maintain control of the stretcher frame with your free hand. It should rest on the outside
rail applying only light pressure. The stretching pressure should be no more than 15-20
psi to start a stretch. Increase the pressure slowly and let the frame rise no more than 3-
4". Do not push the frame flat against the deck. Pushing down on the frame during a
stretch will promote slipping and can cause the artwork to distort.
"Small art tends to flip off the stretcher plates. Always keep a free hand on the rail."
12