GALLERY 60 Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial GALLERY 60. GALLERY 60 18 páginas. Canvas stretching machine

Note:

When the operator removes their foot from the pedal the clamping bar will "clamp" the

canvas. The operator would then move the wood stretcher frame forward and off of the

stretcher plates, it should now be resting on the angle bar in front of the plates. This

position is referred to as the "un-loaded" position. In this position the stretcher bar

should extend approximately ½" over the front of the angle bar. In summary the plates

should be behind the angle bar and in front of the bar by approximately ½" in either the

"unloaded" or the "loaded" positions.

Basic Operation

Video:

http://www.youtube.com/watch?v=w5000LVd9tc

1. Lay the artwork "facedown" on a clean work surface behind the machine. Fold the

canvas along the image so that approximately 1/16" of the image is extending over

the radius.

This is referred to as the "Un-loaded Position"