GALLERY 60 사용 설명서 - 페이지 8

{카테고리_이름} GALLERY 60에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GALLERY 60 18 페이지. Canvas stretching machine

Note:

When the operator removes their foot from the pedal the clamping bar will "clamp" the

canvas. The operator would then move the wood stretcher frame forward and off of the

stretcher plates, it should now be resting on the angle bar in front of the plates. This

position is referred to as the "un-loaded" position. In this position the stretcher bar

should extend approximately ½" over the front of the angle bar. In summary the plates

should be behind the angle bar and in front of the bar by approximately ½" in either the

"unloaded" or the "loaded" positions.

Basic Operation

Video:

http://www.youtube.com/watch?v=w5000LVd9tc

1. Lay the artwork "facedown" on a clean work surface behind the machine. Fold the

canvas along the image so that approximately 1/16" of the image is extending over

the radius.

This is referred to as the "Un-loaded Position"