HIGHLEAD GC2268-2BXL Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Máquina de coser HIGHLEAD GC2268-2BXL. HIGHLEAD GC2268-2BXL 11 páginas. Two needle cylindrical bed compound feed lockstitch sewing machine (rotary)
Imprimir página10. Adjusting the stitch length
Turn stitch length dial counter-clockwise to bring the desired value to the top of the
dial so that the value is aligned with the pin.
Reverse feed stitching
1）The machine performs reverse feed stitching as long as the lever is held depressed.
2）The moment you release the lever, the machine resumed the normal stitching mode.
11. Timing between rotating hook motion and needle motion
1）Set feed length (stitch length) to "6" on the feed setting dial.
2） When needle is lifted 2.4mm from the lower dead point, as shown in Figure,
the following positional relationship should be maintained.
· The upper edge of needle eye should be 2.3 mm below the hook point.
· The hook point should be located at the center of needle axis.
· Gap between the hook point and the side face of needle should be 0.0.5mm.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
— 6 —