HighPoint RocketRAID 840A Manual de instalación rápida - Página 5
Navegue en línea o descargue pdf Manual de instalación rápida para Hardware informático HighPoint RocketRAID 840A. HighPoint RocketRAID 840A 8 páginas. Sata 6gb/s pci-express 3.0 x8 raid controller
Imprimir página
Hardware Installation
Installing the RAID Controller
Note: Make sure the system is powered-off before installing the RAID Controller.
1.
Open the system chassis and locate an unused PCI-E (x8, x16) slot.
2.
Remove the PCI slot cover.
3.
Gently insert the RAID controller into the PCI-E slot, and secure the bracket to
the system chassis.
4.
After installing the adapter, attach the hard disks or disk backplane to the
RAID controller using the appropriate data cables.
5.
Close and secure the system chassis.
Using the RocketRAID 840A
BIOS
After installing the RAID controller and powering on the system, the RAID
controller BIOS should post during the system's boot procedure.
Use Ctrl + H key to log-in to the BIOS setting utility. The BIOS setting utility can
be used for RAID management.
Please refer to the user guide for more information about using the BIOS
interface:
http://www.highpoint-tech.com/PDF/RR840A/RR840A_user_guide.pdf
5