HighPoint RocketRAID mini SAS 3G HBA Series Manual de instalación - Página 5
Navegue en línea o descargue pdf Manual de instalación para Controlador HighPoint RocketRAID mini SAS 3G HBA Series. HighPoint RocketRAID mini SAS 3G HBA Series 10 páginas. Data single
Imprimir páginaPart 3 Hardware Installation and Verification
Before installing the RocketRAID mini‐SAS 3G series controller
• Make sure computer is turned off and unplugged from its power source
• Take appropriate electrostatic discharge precautions:.
Remove the PCIe slot cover.
Gently insert the RocketRAID mini‐SAS 3G series controller into the PCIe slot and
secure the bracket to the computer chassis according to your chassis specifications.
After installing the RocketRAID mini‐SAS 3G series controller, restart your computer.
After your computer has started, insert the Driver & Software Installation Disc to
install the necessary drivers for your computer's operating system.
Hardware Verification
Verifying the RocketRAID mini‐SAS 3G series controller is installed into the Mac Pro
system:
Step 1: Click on About this Mac
Step 2: Click on More Info
Step 3: Click on System Report
Step 4: Click on PCI Cards
Step 5: The RocketRAID mini‐SAS 3G series controller will be identified as SCSI.
Step 6: Verify the RocketRAID mini‐SAS 3G HBA is detected and no drivers are
installed.
In Mac OS X 10.5.x and 10.6.x the Driver Installed will be "No".
Once you have verified that the RocketRAID mini‐SAS 3G series controller is
detected you can proceed to the Driver and Software Installation.