HighPoint RocketRAID mini SAS 3G HBA Series Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengontrol HighPoint RocketRAID mini SAS 3G HBA Series. HighPoint RocketRAID mini SAS 3G HBA Series 10 halaman. Data single

Halaman Cetak

Part 3 Hardware Installation and Verification

Before installing the RocketRAID mini‐SAS 3G series controller

• Make sure computer is turned off and unplugged from its power source

• Take appropriate electrostatic discharge precautions:.

Remove the PCIe slot cover.

Gently insert the RocketRAID mini‐SAS 3G series controller into the PCIe slot and

secure the bracket to the computer chassis according to your chassis specifications.

After installing the RocketRAID mini‐SAS 3G series controller, restart your computer.

After your computer has started, insert the Driver & Software Installation Disc to

install the necessary drivers for your computer's operating system.

Hardware Verification

Verifying the RocketRAID mini‐SAS 3G series controller is installed into the Mac Pro

system:

Step 1: Click on About this Mac

Step 2: Click on More Info

Step 3: Click on System Report

Step 4: Click on PCI Cards

Step 5: The RocketRAID mini‐SAS 3G series controller will be identified as SCSI.

Step 6: Verify the RocketRAID mini‐SAS 3G HBA is detected and no drivers are

installed.

In Mac OS X 10.5.x and 10.6.x the Driver Installed will be "No".

Once you have verified that the RocketRAID mini‐SAS 3G series controller is

detected you can proceed to the Driver and Software Installation.