HighPoint SSD7505 Uso manual - Página 15

Navegue en línea o descargue pdf Uso manual para Controlador HighPoint SSD7505. HighPoint SSD7505 19 páginas. Using nvme raid aics with the dell precision 3930 rack workstation
También para HighPoint SSD7505: Manual de instalación (14 páginas), Manual de instalación (12 páginas), Manual de instalación (15 páginas), Manual de instalación rápida (6 páginas), Manual de instalación rápida (8 páginas), Manual de instalación (14 páginas), Manual de instalación (16 páginas), Manual de instalación (19 páginas)

Using HighPoint NVMe RAID AICs with the Dell Precision 3930 Rack Workstation

4. Uninstalling a HighPoint NVMe RAID AIC from the Dell

Precision 3930 Rack Workstation

a. Screwdriver (system cover require a screwdriver to open)

b. Wired ESD wrist strap (to prevent electrostatic accidents)

a. Use a wired ESD wrist strap that is properly grounded.

b. Shut down the system.

c. Insert a screwdriver and turn counterclockwise to unlock the system cover

latch.

d. Lift the latch upward to remove the system cover.

e. Remove the riser1 module from the system.

f. If you are using the SSD7140A, SSD7540, RocketAIC 7140AW, or RocketAIC

7540HW, you will need to disconnect the power cable to the 8-pin power

connector on the system and to the 6-pin power connector on the HighPoint

NVMe RAID AICs.

Note:

If you are not using SSD7140A, SSD7540, RocketAIC 7140AW, or

RocketAIC 7540HW, you can safely move to the next step.

g. Pull the riser1 module latch and push the release tab on the PCIe slot.

h. Holding the edge of the HighPoint NVMe RAID AIC, lift up to remove the