Galls Street Thunder ST280 Manual de instrucciones de instalación y funcionamiento - Página 18

Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Amplificador Galls Street Thunder ST280. Galls Street Thunder ST280 20 páginas. Siren amplifier & light controller
También para Galls Street Thunder ST280: Manual de instrucciones de instalación y funcionamiento (18 páginas)

Galls Street Thunder ST280 Manual de instrucciones de instalación y funcionamiento
Input Voltage
10 - 16 VDC (negative ground)
Input Current
8.0 Amps @ 13.6 VDC (single 100W speaker)
16.0 Amps @ 13.6 VDC (dual 100W speakers)
Standby Current
Less than 15 mA
Audio Frequency
200Hz - 10 kHz + 3db
Speaker Output Power
105 WATTS RMS MAX. (15.0 VDC – single 100W speaker)
200 WATTS RMS MAX. (15.0 VDC –dual 100W speakers)
Siren Frequency
675Hz - 1633Hz
High Voltage Protection
16 - 18 VDC will cause siren output to cease, resumes at normal
Speaker Short Circuit
50 AMPS (battery must be capable of supplying this for unit to auto
Protection Current
Operating Temperature
-15° F to +140°F
Siren Controls
7-position rotary switch (Radio, PA, Manual, HF, Wail, Yelp, Thunder)
Momentary Manual/Horn rocker switch
Auxiliary input (jumper programmable) for positive or negative horn
Park Kill input (jumper programmable) for positive or negative
Thunder (and Two-Tone) disable (jumper programmable)
Two-Tone activation (swaps modes with Thunder) (jumper
Diagnostic Indicators
Two LED indicators provide diagnostic feedback, one for each
Light Controls
4 push-on/push-off buttons (1 programmable 8 sec. time delay)
4-position slide switch (Off, L1, L1 & L2, L1 & L2 & L3 & Wail)
Light Output Ratings
20A fuse on each of the 7 light outputs. (4 push buttons, 3 slide
Siren Connections
Detachable, 12-pin, positive locking connector with pigtail leads.
(12-Pin Connector)
(2) Positive, (2) Negative, (1) Activation (on/off), (1) Backlighting,
(2) Speaker, (2) Radio, Auxiliary, Park Kill
Light Control
+12 – two 8 AWG leads
Connections
L1, L2, L3 (Slide Switch) and S1, S2, S3, S4 (Push buttons) 9-pin
Size
6" Wide, 6-1/2" Deep, 3" High
Shipping Weight
6 lbs.

Specifications

voltage
shut-down with a speaker short)
-Remote Manual or Hands Free operation
activation
programmable)
speaker
positions)
connector
-16-