Galvin Flowmatic Safe-Cell Manual de instalación del producto - Página 3
Navegue en línea o descargue pdf Manual de instalación del producto para Productos de fontanería Galvin Flowmatic Safe-Cell. Galvin Flowmatic Safe-Cell 8 páginas. Concealed dual temperature basin assembly with controller
Imprimir páginaMOUNTING DETAILS
Face plate cut out position
-
Locate push button faceplate at a suitable
distance from the outlet (we recommend 300mm
from the centre of the outlet and at a suitable
height or to project specification).
Note: The outlet can be either wall mounted or hub
mounted (Outlets are not supplied and must
be ordered separately).
Typical Installation
COMPONENT DIMENSIONS
52448- STAINLESS STEEL FACE PLATE ASSEMBLY
52028 - TRANSFORMER
Version 2, 30 August 2017, Page 3 of 8
Cut out details for face plate
-
The stainless steel face plate assembly should
be mounted flush to the wall over a 98mm x
60mm cut-out, ensure wall depth between
45mm minimum - 70mm maximum from finished
wall surface to the back of box.
52063 - SOLENOID ASSEMBLY
52504/52504X - FLOWMATIC CONTROLLER