Galvin Flowmatic Safe-Cell 제품 설치 매뉴얼 - 페이지 3

{카테고리_이름} Galvin Flowmatic Safe-Cell에 대한 제품 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galvin Flowmatic Safe-Cell 8 페이지. Concealed dual temperature basin assembly with controller

페이지 인쇄

MOUNTING DETAILS

Face plate cut out position

Locate push button faceplate at a suitable

distance from the outlet (we recommend 300mm

from the centre of the outlet and at a suitable

height or to project specification).

Note: The outlet can be either wall mounted or hub

mounted (Outlets are not supplied and must

be ordered separately).

Typical Installation

COMPONENT DIMENSIONS

52448- STAINLESS STEEL FACE PLATE ASSEMBLY

52028 - TRANSFORMER

Version 2, 30 August 2017, Page 3 of 8

Cut out details for face plate

The stainless steel face plate assembly should

be mounted flush to the wall over a 98mm x

60mm cut-out, ensure wall depth between

45mm minimum - 70mm maximum from finished

wall surface to the back of box.

52063 - SOLENOID ASSEMBLY

52504/52504X - FLOWMATIC CONTROLLER