AGS Merlin 1000S Manual de uso e instalación - Página 4

Navegue en línea o descargue pdf Manual de uso e instalación para Controlador AGS Merlin 1000S. AGS Merlin 1000S 10 páginas. Gas utility isolation controller
También para AGS Merlin 1000S: Manual de instalación, uso y mantenimiento (10 páginas), Manual de instalación y funcionamiento (12 páginas), Manual de instalación y funcionamiento (16 páginas)

Merlin 1000S

Gas Utility Controller

(4)

[PRESSURE SENSOR]

Gas Pressure Transducer

The terminals marked pressure sensor "+ - IN ".These wire to the gas pressure transducer

which is screwed into the downstream port on the gas solenoid valve (see wiring below).

ENSURE THE TRANSDUCER IS CONNECTED TO THE DOWNSTREAM PORT.

Operating Pressure = 0.17psi min - 1.45psi max

(5)

[EM REMOTE]

These connections are linked out as a factory setting. (fig1)

Remote emergency shut-off buttons should be volt free and

wired to the Merlin panel using a Plenum Security Cable. White,

18/2 (18AWG 2 Conductor), stranded, CMP or similar.

(6)

[GAS DETECTOR]

These terminals are [+ -] and [

These can be wired to various Merlin gas detectors.

For multiple detector wiring consult the gas detector manual (see example wiring below).

If no detector is being used leave the link in [

Rev: 04 Date: 15-08-18

] and should be volt free dry contact connections.

] (fig2)

User & Installation Manual

fig1

fig2