AGS Merlin 1000S Manual de instalación y funcionamiento - Página 10
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Controlador AGS Merlin 1000S. AGS Merlin 1000S 16 páginas. Gas utility isolation controller
También para AGS Merlin 1000S: Manual de uso e instalación (10 páginas), Manual de instalación, uso y mantenimiento (10 páginas), Manual de instalación y funcionamiento (12 páginas)
Imprimir página
Installation & Operation Manual
OPERATION
First Power Up
On connecting mains power, an LED on the front of the panel (AGS Logo) will illuminate red.
Turn the key switch to on position.
Turn the key switch to the off position to turn the panel off.
Emergency Shut Off Button
The emergency shut off button is located on the front of the panel.
There is also a facility for remote shut off buttons to be wired in series on the circuit board.
The emergency shut off button(s) will cut off the gas supply and electrics only when activated.
To reinstate the system, the emergency shut off button(s) will need to be reset and the panel
restarted.
LED Indicators
Gas On
When the key switch is turned on, the Merlin 1000S will check the installation for gas leaks. If gas
proving is successful, the gas valve will open and the 'Gas On' LED will illuminate.
ON = Gas On
OFF = Gas Off
Testing
This LED will illuminate GREEN for approximately 30 seconds when the panel is checking the
integrity of the gas installation upon start up.
ON = proving the gas line, do NOT operate any appliances.
1000S IOM Rev: 07
01-20
Merlin 1000S
10