Galvin Engineering Ezy-Drink 316 TDBFXEB Manual de instalación del producto - Página 2

Navegue en línea o descargue pdf Manual de instalación del producto para Productos de fontanería Galvin Engineering Ezy-Drink 316 TDBFXEB. Galvin Engineering Ezy-Drink 316 TDBFXEB 5 páginas. Remote electronic drinking tapware

Product Installation Guideline
PRE-INSTALLATION
MOUNTING DETAILS - ROUGH IN DIMENSIONS
Ø19
PIEZO
BUBBLER OR
BUTTON
JUG FILLER
MOUNTING DETAILS - OVERALL DIMENSIONS
TD25XEB

INSTALLATION

IMPORTANT: Galvin Engineering products must be installed in accordance with these installation instructions
and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical
supply conditions must also comply to the applicable national and/or state standards. Failing to comply with these
provisions shall void the product warranty and may affect the performance of the product.
1. Fit Body & Mouthguard Outlet
- Remove the lock nut.
- Fit the body into the trough ensuring the rubber
o-ring is placed between the trough and the body.
- Secure outlet underneath with the supplied back
nut and tighten the screws using a 2.5mm hex key
- Take care not to over-tighten.
Ø23 NOM
TDBFXEB
2. Fit Flexi Hose
-
Fit the flexi hose to solenoid as shown.