- ページ 2

配管製品 Galvin Engineering Ezy-Drink 316 TDBFXEBのPDF 製品インストール・マニュアリンをオンラインで閲覧またはダウンロードできます。Galvin Engineering Ezy-Drink 316 TDBFXEB 5 ページ。 Remote electronic drinking tapware

ページを印刷する

Product Installation Guideline

PRE-INSTALLATION

MOUNTING DETAILS - ROUGH IN DIMENSIONS

Ø19

PIEZO

BUBBLER OR

BUTTON

JUG FILLER

MOUNTING DETAILS - OVERALL DIMENSIONS

TD25XEB

INSTALLATION

IMPORTANT: Galvin Engineering products must be installed in accordance with these installation instructions

and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical

supply conditions must also comply to the applicable national and/or state standards. Failing to comply with these

provisions shall void the product warranty and may affect the performance of the product.

1. Fit Body & Mouthguard Outlet

- Remove the lock nut.

- Fit the body into the trough ensuring the rubber

o-ring is placed between the trough and the body.

- Secure outlet underneath with the supplied back

nut and tighten the screws using a 2.5mm hex key

- Take care not to over-tighten.

Ø23 NOM

TDBFXEB

2. Fit Flexi Hose

Fit the flexi hose to solenoid as shown.