Galvin Engineering Flowmatic TZ-FLOWSENC24 Manuales de instalación - Página 5

Navegue en línea o descargue pdf Manuales de instalación para Productos de fontanería Galvin Engineering Flowmatic TZ-FLOWSENC24. Galvin Engineering Flowmatic TZ-FLOWSENC24 11 páginas. Ss face plate w/ concealed 24v ac wall sensor

Imprimir página

Product Installation Guidelines

3. Mount face plate

We recommend that all cabling is fed through 25mm

conduit to make servicing and replacment easier.

Apply a thin bead of silicon on the edge of the wall cut

out.

Fit the face plate using screws suitable for the fixing

method. (Fasteners to be supplied by installer).

If extension leads are required, please contact

Galvin Specialised.

Do not force the faceplate to fit onto wall or

attempt to disassemble components, as this

could result in damage to sensor.

4. Secure wiring with suppressor (not

supplied)

−

Connect the electrical interference

suppressor to each cable (1x

Transformer, 1x Solenoid Lead) as shown

and ensure they are as close to the

sensor face as possible

All electrical components should be

protected from contact with water or

excessive heat and installed in

accordance with local regulations.

Version 1.1, 30 April 2021, Page 5 of 11