Galvin Engineering Flowmatic TZ-FLOWSENC24 Manuales de instalación - Página 6

Navegue en línea o descargue pdf Manuales de instalación para Productos de fontanería Galvin Engineering Flowmatic TZ-FLOWSENC24. Galvin Engineering Flowmatic TZ-FLOWSENC24 11 páginas. Ss face plate w/ concealed 24v ac wall sensor

Imprimir página

Product Installation Guidelines

(NOT SUPPLIED)

5. Connect power supply & Check for correct operation

− The 24V AC transformer (not supplied) is plugged into a

standard mains power point (GPO).

− Turn on the power point and test the unit.

− Wave the back of your hand through the beam to turn

the water on and again to turn the water off.

− The sensor may require adjustment. Please ensure that

the sensor is in a position that reflects the actual

installation

Note: The sensor is factory set to medium and will

need to be adjusted to suit individual installations.

All electrical components should be protected

from contact with water or excessive heat and

installed in accordance with local regulations.

The connection of this product to mains power

supply should be undertaken by a competent

person and should conform to local Wiring

Regulation – AS3000 Wiring rules.

Note: For transformer supply and orders please contact

Galvin Specialised

Typical Installation

Version 1.1, 30 April 2021, Page 6 of 11