Dynojet POWER COMMANDER FC Manual de instrucciones de instalación - Página 6

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Accesorios para motocicletas Dynojet POWER COMMANDER FC. Dynojet POWER COMMANDER FC 6 páginas. Fuel controller for yamaha zuma 125 2009; yamaha zuma 125 2010; yamaha zuma 125 2011; yamaha zuma 125 2012; yamaha zuma 125 2013; yamaha zuma 125 2014
También para Dynojet POWER COMMANDER FC: Instrucciones de instalación (5 páginas), Manual de instrucciones de instalación (6 páginas), Instrucciones de instalación (4 páginas), Instrucciones de instalación (5 páginas)

Imprimir página
Dynojet POWER COMMANDER FC Manual de instrucciones de instalación
FIG.J
FIG.K
IFC12016.01
www.powercommander.com
unplug
unplug
15
Trace the wiring harness from the stock left O2 sensor to its connector near
the side-stand as shown in Figure J.
16
Unplug the stock left O2 sensor.
The stock O2 sensor will no longer be used. It can be removed from the
exhaust, if desired and if you have a way to plug the hole.
17
Trace the wiring harness from the stock right O2 sensor to its connector near
the rear brake lever as shown in Figure K.
18
Unplug the stock right O2 sensor.
The stock O2 sensor will no longer be used. It can be removed from the
exhaust, if desired and if you have a way to plug the hole.
19
Make sure your wiring is free and clear of any hot or moving parts. Tie the
wiring up where you may see fit.
20
Reinstall the body panels, injector covers, and the seat.
2013 BMW R1200GS - 6