Dynojet POWER COMMANDER FC Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары для мотоциклов Dynojet POWER COMMANDER FC. Dynojet POWER COMMANDER FC 6 страниц. Fuel controller for yamaha zuma 125 2009; yamaha zuma 125 2010; yamaha zuma 125 2011; yamaha zuma 125 2012; yamaha zuma 125 2013; yamaha zuma 125 2014
Также для Dynojet POWER COMMANDER FC: Инструкции по установке (5 страниц), Руководство по установке (6 страниц), Инструкции по установке (4 страниц), Инструкции по установке (5 страниц)

FIG.J

FIG.K

IFC12016.01

www.powercommander.com

unplug

Trace the wiring harness from the stock left O2 sensor to its connector near

the side-stand as shown in Figure J.

Unplug the stock left O2 sensor.

The stock O2 sensor will no longer be used. It can be removed from the

exhaust, if desired and if you have a way to plug the hole.

Trace the wiring harness from the stock right O2 sensor to its connector near

the rear brake lever as shown in Figure K.

Unplug the stock right O2 sensor.

The stock O2 sensor will no longer be used. It can be removed from the

exhaust, if desired and if you have a way to plug the hole.

Make sure your wiring is free and clear of any hot or moving parts. Tie the

wiring up where you may see fit.

Reinstall the body panels, injector covers, and the seat.

2013 BMW R1200GS - 6