AGS Merlin 1000S Manual de uso e instalación - Página 8

Navegue en línea o descargue pdf Manual de uso e instalación para Equipos de laboratorio AGS Merlin 1000S. AGS Merlin 1000S 10 páginas. Gas utility isolation controller
También para AGS Merlin 1000S: Manual de instalación, uso y mantenimiento (10 páginas), Manual de instalación y funcionamiento (12 páginas), Manual de instalación y funcionamiento (16 páginas)

Merlin 1000S

Gas Utility Controller

Fan Switch Integration

There is the facility to connect a Fan Switch (FS1 or FS2 sold

separately).

The Fan Switch provides the facility to turn the fan(s) ON when the

Merlin panel is on and turn the fans OFF when the panel is

switched off

There is a dip-switch located inside the facia of the Merlin 1000S

labelled [EM SELECTION].

This is factory set in the 'OFF' position which instructs the system to

shut down the fan(s) and gas supply on activation of the

Emergency shut off button(s).

On installation, this can be switched to the 'ON' position, this will instruct the system to leave

the fans on and only shut off the gas supply on activation of an Emergency shut off button.

Note: This option is not available if a Fan Switch is not installed.

Gas Fill & Prove Time

Gas fill and prove times are adjustable. There are two dip-switches

located on the inside facia of the Merlin 1000S labelled [FILL TIME]

and [PROVE TIME].

They are factory set in the OFF position.

Fill and prove time can be changed by switching the relevant dip

switch as follows;

[FILL TIME]: Off – 5 seconds.

[PROVE TIME] Off – 30 seconds.

Once selected - please remove power from the fuse spur for 10 seconds.

The Merlin 1000S has a built-in auto reset feature. There is a dip-

switch located on the inside facia of the Merlin 1000S labelled

[Auto Reset].

This is factory set in the 'OFF' position, this means, if you experience

a power cut, the panel has to be restarted manually.

This can be switched to the 'ON' position and will instruct the

system to restart automatically when power is restored following a

power cut or similar situation.

Rev: 04 Date: 15-08-18

On – 10 seconds

On – 50 seconds

User & Installation Manual