HIKOB LION H-RT201A Manual de instalación - Página 10

Navegue en línea o descargue pdf Manual de instalación para Enrutador de red HIKOB LION H-RT201A. HIKOB LION H-RT201A 12 páginas.

Installation guide
INSTALL_LION-V6
2019/01 Edition

4.2 LION Mounting procedure

The LION is delivered ready to be installed, batteries are charged, so it is useable right
away. As its emplacement is already determined by the site pre-study, the following
sections explain the mounting procedure itself, and recommendations for final
adjustments.
Respect safety rules working at heights when installing the LION: use an
elevating work platform, and appropriate PPE. Once installed at heights, the
LION remains in place, and is not reachable by unqualified staff.
a. Installation accessories
The LION is delivered with all accessories needed for a good installation. This is a
set of 3 elements:
Clip
Arm
Support
b. Mounting procedure
For mounting on pole:
- Locate the installation location of the router
- Insert the clamp into the holes provided in the flat base of the arm.
- Secure the arm with the clamp on the support post.
- Screw the clip on the arm.
- Clip the router onto the arm.
- Orient the router correctly (serial number downwards and solar panel up)
A clip coupled with a female thread screw. It hosts the mounting
bracket of the LION. The clip is then screwed on the articulated
arm.
An orientable arm with a plane base that can be screwed on a
wall.
An optional strapping support for round poles. You screw the base
of the arm on the support, and you fasten it on round elements
using the strapping method adapted to your environment. In the
picture below, plastic clamps have been used. Support.
Page 10