- ページ 10

ネットワーク・ルーター HIKOB LION H-RT201AのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。HIKOB LION H-RT201A 12 ページ。

Installation guide

INSTALL_LION-V6

2019/01 Edition

4.2 LION Mounting procedure

The LION is delivered ready to be installed, batteries are charged, so it is useable right

away. As its emplacement is already determined by the site pre-study, the following

sections explain the mounting procedure itself, and recommendations for final

adjustments.

Respect safety rules working at heights when installing the LION: use an

elevating work platform, and appropriate PPE. Once installed at heights, the

LION remains in place, and is not reachable by unqualified staff.

a. Installation accessories

The LION is delivered with all accessories needed for a good installation. This is a

set of 3 elements:

Clip

Arm

Support

b. Mounting procedure

For mounting on pole:

- Locate the installation location of the router

- Insert the clamp into the holes provided in the flat base of the arm.

- Secure the arm with the clamp on the support post.

- Screw the clip on the arm.

- Clip the router onto the arm.

- Orient the router correctly (serial number downwards and solar panel up)

A clip coupled with a female thread screw. It hosts the mounting

bracket of the LION. The clip is then screwed on the articulated

arm.

An orientable arm with a plane base that can be screwed on a

wall.

An optional strapping support for round poles. You screw the base

of the arm on the support, and you fasten it on round elements

using the strapping method adapted to your environment. In the

picture below, plastic clamps have been used. Support.

Page 10