AGT INDUSTRIAL AGT-WB24 Manual del producto - Página 7

Navegue en línea o descargue pdf Manual del producto para Equilibradoras de ruedas AGT INDUSTRIAL AGT-WB24. AGT INDUSTRIAL AGT-WB24 18 páginas.

Imprimir página

Pressbutton function H

figure

FOUR. operation

Standard balance mode

1 ) install the wheel

★ Befor perform any operation make sure to remove all counterweight. Check whether the tire pressure

1. turn on the machine

2.input a,b,d value

ALU5 balance

3. press the ALU key to turn on

mode

the mode light

4. start, wait until it stops

1. turn on the machine

ALUS balance

on the mode light

mode

3. input ①ai②ae③ d value

4. start,wait until it stops.

1.turn on the machine

2.input a,b,d value

Static balance

mode

3 . press the ALU key to alive

( motorcycle)

the mode

4. start, wait until it stops

function description

distance caliper head to the

inner rim

input tire width

input tire diameter

recalculate the balance results

start

press the ALU key to turn

figure

paste the unbalanced block on

the alignment plane inner, and

clip the unbalanced block at

outer.

Paste unbalance block on two

correction planes inner and outer

sides of the spokes of the

specified rim

Paste unbalance block at

center of wheel rim on

alignment plane

function description

OPT program

balance mode slection

combination/division

display actual unbalance value

stop or cancel