AGT INDUSTRIAL AGT-WB24 Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Балансировщики колес AGT INDUSTRIAL AGT-WB24. AGT INDUSTRIAL AGT-WB24 18 страниц.

Печатать страницу
Pressbutton function H
figure
FOUR. operation
1
Standard balance mode
1 ) install the wheel
★ Befor perform any operation make sure to remove all counterweight. Check whether the tire pressure
1. turn on the machine
2.input a,b,d value
ALU5 balance
3. press the ALU key to turn on
mode
the mode light
4. start, wait until it stops
1. turn on the machine
2.
ALUS balance
on the mode light
mode
3. input ①ai②ae③ d value
4. start,wait until it stops.
1.turn on the machine
2.input a,b,d value
Static balance
mode
3 . press the ALU key to alive
( motorcycle)
the mode
4. start, wait until it stops
function description
distance caliper head to the
inner rim
input tire width
input tire diameter
recalculate the balance results
start
press the ALU key to turn
figure
paste the unbalanced block on
the alignment plane inner, and
clip the unbalanced block at
outer.
Paste unbalance block on two
correction planes inner and outer
sides of the spokes of the
specified rim
Paste unbalance block at
center of wheel rim on
alignment plane
function description
OPT program
balance mode slection
combination/division
display actual unbalance value
stop or cancel
7