Maintronic Casambi CBA UP Manual - Página 18

Navegue en línea o descargue pdf Manual para Controlador Maintronic Casambi CBA UP. Maintronic Casambi CBA UP 20 páginas. Blind actuator
También para Maintronic Casambi CBA UP: Manual (12 páginas)

Imprimir página

5. Operation

5.1 Operation with device button

The device button

has the same priority as the Casambi APP, the last one wins.

Function device button

Switching pattern

Relais

STOP

Relais

DOWN

Relais

STOP

5.2 Operation with pushbutton input T1 / T2 (only 10.752)

Enabled with 2 programmable inputs, local con-

trol is so much easier. These inputs can used as

a direct preconfigured Up-Down pushbutton or

control any casambi enabled device over Casambi

input control. It's just a change of an parameter in

the app.

5.3 Push Button mode

In order to change the Push Button mode, pro-

ceed as shown on the right.

Push Button mode - Possible parameters

Casambi

Standard Casambi Push button input

Button

Function as push button - push=active; release=off

Button command processing internally in MTC controller

Group Button

Function as group button - push=on; release=off

If several blind actuators are combined as a group, one device of the group must be defined as the master. For

the desired master, the push button style must be set to Group Button.

The other maintronic devices in the group are automatically slaves and the function of the master takes place.

Switch

Function as a switch - 1x push = on - 1x push = off)

release is ignored

Group Switch

Function as a group switch - 1x push = on - 1x push = off

If several blind actuators are combined as a group, one device of the group must be defined as the master. For

the desired master, the push button style must be set to Group Switch.

The other maintronic devices in the group are automatically slaves and the function of the master takes place.

Keystroke

Short press

LED

green

off

red

off

www.maintronic.de

The functionality of the push button inputs is defi-

ned by a parameter. Before the button inputs are

configured, a push button mode must be selected.

1. Open Casambi app

2. Double tap on the device

3. Scroll to the item parameter

4. Tap on Push Button mode

5. Select parameters

(See the list below)