HIKOKI UC 18YRL Manual de instrucciones de manipulación - Página 7
Navegue en línea o descargue pdf Manual de instrucciones de manipulación para Cargador de batería HIKOKI UC 18YRL. HIKOKI UC 18YRL 20 páginas.
También para HIKOKI UC 18YRL: Manual de instrucciones de manipulación (12 páginas)
Imprimir página
○ Since the built-in micro computer takes about 3
seconds to confirm that the battery being charged with
charger is taken out, wait for a minimum of 3 seconds
before reinserting it to continue charging. If the battery
is reinserted within 3 seconds, the battery may not be
properly charged.
MAINTENANCE AND INSPECTION
1. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that
they are properly tightened. Should any of the screws
be loose, retighten them immediately. Failure to do so
could result in serious hazard.
2. Cleaning of the charger
When the charger is stained, wipe with a soft dry cloth
or a cloth moistened with soapy water. Do not use
chloric solvents, gasoline or paint thinner, for they melt
plastics.
3. Store idle charger
When not in use, the charger should be stored in dry,
high or locked-up place — out of reach of children.
CAUTION
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifications herein are subject to
change without prior notice.
7
English