HIKOKI UC 18YRL 취급 지침 매뉴얼 - 페이지 7

{카테고리_이름} HIKOKI UC 18YRL에 대한 취급 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKOKI UC 18YRL 20 페이지.
HIKOKI UC 18YRL에 대해서도 마찬가지입니다: 취급 지침 매뉴얼 (12 페이지)

○ Since the built-in micro computer takes about 3

seconds to confirm that the battery being charged with

charger is taken out, wait for a minimum of 3 seconds

before reinserting it to continue charging. If the battery

is reinserted within 3 seconds, the battery may not be

properly charged.

MAINTENANCE AND INSPECTION

1. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws

be loose, retighten them immediately. Failure to do so

could result in serious hazard.

2. Cleaning of the charger

When the charger is stained, wipe with a soft dry cloth

or a cloth moistened with soapy water. Do not use

chloric solvents, gasoline or paint thinner, for they melt

plastics.

3. Store idle charger

When not in use, the charger should be stored in dry,

high or locked-up place — out of reach of children.

CAUTION

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

NOTE

Due to HiKOKI's continuing program of research and

development, the specifications herein are subject to

change without prior notice.

English