Maiwe MPSE1202G-GTPOE30-GT-DC24 Manual de inicio rápido - Página 3

Navegue en línea o descargue pdf Manual de inicio rápido para Hardware de red Maiwe MPSE1202G-GTPOE30-GT-DC24. Maiwe MPSE1202G-GTPOE30-GT-DC24 4 páginas. Hardened gigabit high power poe injector

Imprimir página

1. Tighten the screws to fix the

Wall Mount plate

Setup

a) Connect the Ethernet port of the injector to a LAN switch with a network cable.

b) Connect the PoE Out port to the PoE device

c) After the device is powered on, the PWR indicator will all be on. If the indicators are not on, check the

power supply connection.

d) After all cables are correctly connected, the indicators will be lit as per port status LEDs (page 3)..

Interface

Ethernet/PoE Out Port

RJ-45 Pin Assignment

Power Connection：

Description

Power Input

Cable Connections

Signal Type

Ethernet

Wuhan Maiwe Communication Co., Ltd

Tel: 027-87170215/16 Fax: 027-87170217

Add: No.52 Liufang Avenue, East lake High-tech Development Zone, Wuhan, China

2. Mount the switch on the wall or

on a flat surface with 2 screws

piercing through the mounting

holes to secure it in position.

+12-48V

GND

(DC)

Cable Type

Cat. 5 or above

Hardened Gigabit High Power PoE Injector

Ethernet

TP0+

TP0-

TP1+

TP2+

TP2-

TP1-

TP3+

TP3-

RJ45

PoE Out

TP0+

TP0-

TP1+

TP2+/VCC+

TP2-/VCC+

TP1-

TP3+/VCC-

TP3-/VCC-

Connector

V1.0