Maiwe MPSE1202G-GTPOE30-GT-DC24 Краткое руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сетевое оборудование Maiwe MPSE1202G-GTPOE30-GT-DC24. Maiwe MPSE1202G-GTPOE30-GT-DC24 4 страницы. Hardened gigabit high power poe injector
1. Tighten the screws to fix the
Wall Mount plate
Setup
a) Connect the Ethernet port of the injector to a LAN switch with a network cable.
b) Connect the PoE Out port to the PoE device
c) After the device is powered on, the PWR indicator will all be on. If the indicators are not on, check the
power supply connection.
d) After all cables are correctly connected, the indicators will be lit as per port status LEDs (page 3)..
Interface
Ethernet/PoE Out Port
RJ-45 Pin Assignment
Power Connection:
Pin
Description
Power Input
Cable Connections
Signal Type
Ethernet
Wuhan Maiwe Communication Co., Ltd
Tel: 027-87170215/16 Fax: 027-87170217
Add: No.52 Liufang Avenue, East lake High-tech Development Zone, Wuhan, China
2. Mount the switch on the wall or
on a flat surface with 2 screws
piercing through the mounting
holes to secure it in position.
-
+
+12-48V
GND
(DC)
Cable Type
Cat. 5 or above
Hardened Gigabit High Power PoE Injector
Pin
Ethernet
1
TP0+
2
TP0-
3
TP1+
4
TP2+
5
TP2-
TP1-
6
7
TP3+
8
TP3-
RJ45
3
PoE Out
TP0+
TP0-
TP1+
TP2+/VCC+
TP2-/VCC+
TP1-
TP3+/VCC-
TP3-/VCC-
Connector
V1.0