Majacraft Little Gem Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Ruedas giratorias Majacraft Little Gem. Majacraft Little Gem 8 páginas.
Fit the lower drive belt next. Firstly place the belt in the groove on
the crank pulley. Once the belt is in the drive wheel groove as shown
in 5c, use your other hand to turn the drive wheel to wind the belt
into place.
6. Bobbin and flyer
Required:
1 - Plastic bobbin
1 - Delta flyer
If you have some petroleum jelly or vaseline, rub a
small smear onto the flyer shaft. This has already been
done at the factory so is not essential. Now slide the
bobbin on.
At this point screw the flyer on to the flyer shaft. It
may help to hold the whorl with your left hand and
tighten the flyer with your right (assuming you are
right handed). It may also be treadled on by holding
the flyer in one hand and treadling the wheel in an
anticlockwise direction.
If you are looking at the bamboo side of the drive wheel, you need
to put the belt on in such a way that the drive belt is closest on the
right hand side (shown by the arrow in image 5d). If the belt is put
5d
on the other way, it will be more inclined to run backwards.
The tension spring should be positioned leaning to the
right hand side as shown in the picture.
6c
6
5c
6a
6b
majacraft