Bristan DUL3 THBSM C Manual de instrucciones de instalación - Página 9
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Productos de fontanería Bristan DUL3 THBSM C. Bristan DUL3 THBSM C 20 páginas. Thermostatic bath shower mixer
Imprimir página
Installation
1. Place filter washers into the pillars and
screw the pillar legs onto the mixer body.
2. Place the mixer body onto the bath
ensuring the base washers are fitted to
the threaded legs of the pillars.
3. Push the washers onto the threaded
pillar legs and screw the backnuts onto
the threaded pillar legs and tighten fully
against the underside of the bath.
4. Connect the hot and cold water
supplies to the pillar legs ensuring the
hot supply on the left and the cold supply
on the right (when viewed from the front).
5. Turn on both water supplies letting the
water run at both hot and cold settings
for a few minutes to check all joints and
connections for any leaks.
Important: Access must be made
available to the water supplies and fixings
for future maintenance / servicing.
To change from bath to shower mode pull
the diverter know up. To revert back to
bath fill push the diverter knob back
down.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Hot supply
pipework
Cold supply
pipework
9