- ページ 9

配管製品 Bristan DUL3 THBSM CのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Bristan DUL3 THBSM C 20 ページ。 Thermostatic bath shower mixer

Installation

1. Place filter washers into the pillars and

screw the pillar legs onto the mixer body.

2. Place the mixer body onto the bath

ensuring the base washers are fitted to

the threaded legs of the pillars.

3. Push the washers onto the threaded

pillar legs and screw the backnuts onto

the threaded pillar legs and tighten fully

against the underside of the bath.

4. Connect the hot and cold water

supplies to the pillar legs ensuring the

hot supply on the left and the cold supply

on the right (when viewed from the front).

5. Turn on both water supplies letting the

water run at both hot and cold settings

for a few minutes to check all joints and

connections for any leaks.

Important: Access must be made

available to the water supplies and fixings

for future maintenance / servicing.

To change from bath to shower mode pull

the diverter know up. To revert back to

bath fill push the diverter knob back

down.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Hot supply

pipework

Cold supply

pipework