- ページ 8

配管製品 Bristan DUL3 THBSM CのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Bristan DUL3 THBSM C 20 ページ。 Thermostatic bath shower mixer

ページを印刷する
Bristan DUL3 THBSM C 取付説明書

Prior to Installation

Identify all components prior to stating installation.
1. Mixer Body x1
2. Pillar Legs x2
3. Base Washers x2
This mixing valve should be installed in compliance with current water regulations.
For further details contact your Local Water Authority.
This mixing valve is suitable for the following systems:
Gravity Fed Hot & Cold (Equal Pressures)
Unvented Systems
Gas Combination Boiler
Pumped System (Equal Pressures)
Note: On gravity systems the minimum distance from the underside of the water tank /
cylinder to the mixing valve must be at least 5 metres.
Before connecting the mixing valve, thoroughly flush through the water supply pipes to
remove any remaining swarf, debris. Failure to do so may result in damaging the product.
Mixer
Body
Pillar Legs
Base Washer
Washer
Backnut
8
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
4. Washers x2
5. Back Nuts x2
6. Filter Washers x2