Airflex5D AF5D-20 Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Hardware informático Airflex5D AF5D-20. Airflex5D AF5D-20 17 páginas. 2d/3d multi-projector stacking processor
2. Internal Grid Pattern for Geometry Adjustment
To press [PATTERN] key in Remote Controller or at front panel, it will show Cross Hatch grid pattern. To press
[PATTERN] key again, different color of Grid patterns will appear cyclically from White Red Green
Blue Blank. If user wants to disable Grid pattern, please use Exit key in Remote Controller or Menu key in
Front Panel. Each Grid pattern is 50 pixels in width. User can calculate the overlap pixel via the number of
Grid pattern and figure out the pixel number in the images or overlap region.
3. [Picture] Color Adjustment
[Picture] menu can only be activated when input signal is video and [Preset Mode] under [Image Properties]
Menu is not activated. It can adjust brightness, contract, color hue, saturation and sharpness of the image.
4. [Image Setup] for PC graphics from VGA input
[Image Setup] menu can only be activated when video signal input is from VGA input port.
5.1
Automatics: It will do automatic image alignment inside the system
5.2
Manual: manual setting for signal Phase and Clock to eliminate image noise in VGA input
5.3
Horizontal Position: to adjust manually the image horizontal position.
5.4
Vertical Position: to adjust manually the image vertical position.
5. [Image Properties]
[Image properties] is designed for the selection of image color, input port, aspect ratio and output mode
selection. Inside [Color] menu, there are four Preset color (Neutral, sRGB, Reddish and Bluish) and also
customized R.G.B. color independent adjustment. The [Scaling] function is to set aspect ratio of the image.
[Output Mode] is for the selection of output resolutions. User can select output resolution directly from shortcut
key on the front panel or remote controller.
Activate [Image Setup] Menu by Front Panel
keypad or Remote Controller.
3