- ページ 4

コンピュータ・ハードウェア Airflex5D AF5D-20のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Airflex5D AF5D-20 17 ページ。 2d/3d multi-projector stacking processor

2. Internal Grid Pattern for Geometry Adjustment

To press [PATTERN] key in Remote Controller or at front panel, it will show Cross Hatch grid pattern. To press

[PATTERN] key again, different color of Grid patterns will appear cyclically from White  Red  Green 

Blue  Blank. If user wants to disable Grid pattern, please use Exit key in Remote Controller or Menu key in

Front Panel. Each Grid pattern is 50 pixels in width. User can calculate the overlap pixel via the number of

Grid pattern and figure out the pixel number in the images or overlap region.

[Picture] menu can only be activated when input signal is video and [Preset Mode] under [Image Properties]

Menu is not activated. It can adjust brightness, contract, color hue, saturation and sharpness of the image.

[Image Setup] menu can only be activated when video signal input is from VGA input port.

5.1

Automatics: It will do automatic image alignment inside the system

5.2

Manual: manual setting for signal Phase and Clock to eliminate image noise in VGA input

5.3

Horizontal Position: to adjust manually the image horizontal position.

5.4

Vertical Position: to adjust manually the image vertical position.

[Image properties] is designed for the selection of image color, input port, aspect ratio and output mode

selection. Inside [Color] menu, there are four Preset color (Neutral, sRGB, Reddish and Bluish) and also

customized R.G.B. color independent adjustment. The [Scaling] function is to set aspect ratio of the image.

[Output Mode] is for the selection of output resolutions. User can select output resolution directly from shortcut

key on the front panel or remote controller.

Activate [Image Setup] Menu by Front Panel

keypad or Remote Controller.