Gamma 6004 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma 6004. Gamma 6004 20 páginas. 6 point mounting
También para Gamma 6004: Manual del usuario (20 páginas), Manual del usuario (20 páginas), Manual del usuario (19 páginas)

Imprimir página

ASSEMBLY INSTRUCTIONS

Bellows Installation

The bellows assembly is supplied in two pieces and

should be assembled as follows. Place the bellows

section with the flange over the upper support column

with the flange on the top. Place the remaining bellows

over the upper support column and mate it with the

flange on the lower bellows.

Tool Tray Installation

Lower the tool tray over the top of the upper column

support and let it rest loosely on the bellows assembly.

Tension Track Installation

Place the tube of the tension track assembly over the top

of the upper column support. Align the tension track with

the long leg of the base assembly. Securely tighten the

two socket set screws on the tension track assembly

tube, locking it to the upper column support. Align the

notch in the tool tray with the tension track bar while

raising the tool tray. Secure the tray with the set screws

in the side of the tray casting.