Gamma 6004 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma 6004. Gamma 6004 20 páginas. 6 point mounting
También para Gamma 6004: Manual del usuario (20 páginas), Manual del usuario (20 páginas), Manual del usuario (19 páginas)

Gamma 6004 Manual del usuario

ASSEMBLY INSTRUCTIONS

Base Leg Assembly
The GAMMA 6004 stringing machine uses a four leg
base design. The legs must be assembled to the
support post before use. Remove the lower column
support from the carton.
Align the holes in the leg flange with the matching holes
in the lower column support post. Secure the leg with
one FLAT HEAD cap screw through the upper hole, and
one SOCKET HEAD cap screw through the bottom
hole. Repeat this procedure for the three remaining
legs.
Upper Column Support Assembly
Insert the upper column support into the lower column
support / base leg assembly. Leave the upper column
extended to maximum height and lock in place with the
two set screws located at the top of the lower column
support.
3