Gamma 6004 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gamma 6004. Gamma 6004 20 pagina's. 6 point mounting
Ook voor Gamma 6004: Gebruikershandleiding (20 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (19 pagina's)

Pagina afdrukken

ASSEMBLY INSTRUCTIONS

Base Leg Assembly

The GAMMA 6004 stringing machine uses a four leg

base design. The legs must be assembled to the

support post before use. Remove the lower column

support from the carton.

Align the holes in the leg flange with the matching holes

in the lower column support post. Secure the leg with

one FLAT HEAD cap screw through the upper hole, and

one SOCKET HEAD cap screw through the bottom

hole. Repeat this procedure for the three remaining

legs.

Upper Column Support Assembly

Insert the upper column support into the lower column

support / base leg assembly. Leave the upper column

extended to maximum height and lock in place with the

two set screws located at the top of the lower column

support.