Gamma 6004 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Gamma 6004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 6004 20 페이지. 6 point mounting
Gamma 6004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (19 페이지)

페이지 인쇄
Gamma 6004 소유자 매뉴얼

ASSEMBLY INSTRUCTIONS

Base Leg Assembly
The GAMMA 6004 stringing machine uses a four leg
base design. The legs must be assembled to the
support post before use. Remove the lower column
support from the carton.
Align the holes in the leg flange with the matching holes
in the lower column support post. Secure the leg with
one FLAT HEAD cap screw through the upper hole, and
one SOCKET HEAD cap screw through the bottom
hole. Repeat this procedure for the three remaining
legs.
Upper Column Support Assembly
Insert the upper column support into the lower column
support / base leg assembly. Leave the upper column
extended to maximum height and lock in place with the
two set screws located at the top of the lower column
support.
3