Gamma 7000 Es Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma 7000 Es. Gamma 7000 Es 20 páginas.

ASSEMBLY INSTRUCTIONS

"A"

Base Leg Assembly

The GAMMA 7000ES stringing machine uses

a four leg base design. The legs must be

assembled to the support post before use.

Remove the lower column support, the up-

per column support, four (4) legs, four (4)

socket head cap screws and four (4) flat head

cap screws from the small shipping carton.

Base Leg Assembly (Cont.)

Align the holes in the leg flange with the

matching holes in the lower column support

post. Secure the leg with one FLAT HEAD

cap screw through the upper hole, and one

SOCKET HEAD cap screw through the bot-

tom hole. Repeat this procedure for the three

remaining legs.

Base Leg Assembly (Cont.)

To complete the base stand, screw the height adjust-

ment locking knob ("A") into the side of the support

column. The locking knob should not protrude beyond

the inside of the support column at this time.