Gamma 7000 Es 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Gamma 7000 Es에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 7000 Es 20 페이지.

ASSEMBLY INSTRUCTIONS

"A"

Base Leg Assembly

The GAMMA 7000ES stringing machine uses

a four leg base design. The legs must be

assembled to the support post before use.

Remove the lower column support, the up-

per column support, four (4) legs, four (4)

socket head cap screws and four (4) flat head

cap screws from the small shipping carton.

Base Leg Assembly (Cont.)

Align the holes in the leg flange with the

matching holes in the lower column support

post. Secure the leg with one FLAT HEAD

cap screw through the upper hole, and one

SOCKET HEAD cap screw through the bot-

tom hole. Repeat this procedure for the three

remaining legs.

Base Leg Assembly (Cont.)

To complete the base stand, screw the height adjust-

ment locking knob ("A") into the side of the support

column. The locking knob should not protrude beyond

the inside of the support column at this time.