Major tech MT775 Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida Major tech MT775. Major tech MT775 20 páginas. Ac/dc trms clamp meter
También para Major tech MT775: Manual de instrucciones (16 páginas)
Imprimir página
10. DC VOLTAGE MEASUREMENT
1. Set the function switch to
position. The meter automatically defaults to
DC Volts.
2. Insert the red test lead into the "V Ω TEMP HZ"
input terminal and the black lead to the "COM"
terminal.
3. Connect the other end of the test leads to the
circuit under test.
4. Read the display. If a "-" sign is displayed, the
red lead is the negative potential.
Note: • The meter is set to default to "Auto
Range" mode.
• Pressing the
allow the user to record the peak
maximum and minimum readings on the
AC volt range. See page 7 for further
instructions for "PEAK" Hold function.
9
__
__
_ _ _ _
~
V
Hz
hold button will
PEAK
Battery
+
range
-